Controls

3 knob instrument set up as Volume - Volume - Tone

.

HR-3.1 - replace passive Tone control with active stacked Treble/Bass 2 band preamp

.

HR-3.2 - replace entire harness with prewired harness - Treble/Bass as above

.

3 knob instrument set up as Volume - Blend - Tone

.

HR-3.1 - replace passive Tone control with active stacked Treble/Bass 2 band preamp

.

HR-3.3 - replace entire harness with prewired harness - Treble/Bass as above

.

3 knob instrument - new harness

HR-3.4 - 3 band preamp with 2 Mid frequencies

.....Volume/Volume stack

.....push-pull Mid control with choice of 250Hz-800Hz frequency centers

.....Treble/Bass stack

.

4 knob instrument set up as Volume - Volume - Tone - Tone

.

HR-4.1 - replace the passive Tone knobs with separate Treble and Bass controls - 2 band preamp

.

HR-4.2 - replace entire harness with prewired harness - separate Treble and Bass as above

.

HR-4.3 - replace the passive Tone knobs with

.....a Treble/Bass stack and a push-pull Mid control with choice of 250Hz-800Hz Mid frequency

.

HR-4.4 - replace entire harness with prewired harness - Treble/Bass stack and push-pull Mid as above

.

4 knob instrument set up as Volume - Blend - Tone - Tone

.

HR-4.1 - replace the passive Tone knobs with separate Treble and Bass controls - 2 band preamp

.

HR-4.5 - replace entire harness with prewired harness - Treble and Bass as above

.

HR-4.3 - replace the passive Tone knobs with

.....a Treble/Bass stack and a push-pull Mid control with choice of 250Hz-800Hz mid frequency

.

HR-4.6 - replace entire harness with prewired harness - Treble/Bass stack and push-pull Mid as above

.

5 knob instrument

.

HR-5.1 - complete harness

.....Volume - Volume - Treble - Mid (p-p mid freq.) - Bass

.

HR-5.2 - complete harness

.....Volume - Blend - Treble - Mid (p-p mid freq.) - Bass

.

HR-5.3 - complete harness

.....Volume - Volume - Treble - Mid (250Hz - 500Hz - 800Hz) -Bass . separate 3 position mini-toggle switch for Mid frequency selection

.

HR-5.4 - complete harness

.....Volume - Blend - Treble - Mid (250Hz - 500Hz - 800Hz) -Bass . separate 3 position mini-toggle switch for Mid frequency selection

.All harnesses include ground wire to all controls.

..Treble, Mid and Bass tone controls have Center Detent (center click).

...A Push-Pull Active/Passive switch on the Volume control is available at extra cost.

....The Push-Pull Active/Passive switch option is not available for the TCT family of on-board tone controls, a toggle switch must be used for these electronics.

back